Back to Printers

ORTUR Laser Master 2 Laser Engraving Cutting Machine

1793 orders

$243.00$606.00

ORTUR Laser Master 2 Laser Engraving Cutting Machine With 32-Bit Motherboard 7w 15w 20w Laser Printer CNC Router

US
OLM2 LU1-2 7WOLM2 LU1-3 15WOLM2 LU1-4 20WOLM2 LU2-4 20WOLM2 PRO LU2-4
ChinaUnited States
Clear
SKU:
4001079905744
Category:

Brief Introduction:

● The Laser Master 2 – 7W is good at picture engraving.
● The Laser Master 2 – 15W is the most cost-effective, available for both engraving and cutting.
● The Laser Master 2 – 20W is higher power and supports a faster engraving and cutting.

Main Features:
●Specialized Motherboard with STM32 MCU
It could preprocess 32 instructions, support baud rate as high as 921600, more powerful!
●The Most Advanced 32Bits Laser Engraver Firmware Ortur laser master firmware, smarter, faster, higher precision and easier to use.
● Laser power range could be S0 – S1000, compared to 8bits desktop laser engravers, which only has S0 – S255, Ortur Laser Master could control laser beam more accurately, could even use the high power laser unit to “draw” a picture on paper , that the 8bits high power laser engravers could not do.
● Engraving speed could be as high as 3000MM/Min. ( If do not consider the laser carving result, the velocity of movement could be as high as 1000MM/S )
●Active Position Protection
There is a G-sensor on the motherboard, if the machine detects unauthorized movement, the laser beam will stop.
●Laser Beam Safety Guard
If your computer system halted or USB cable disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire.
●Exposure Duration Detection and Limitation
If laser engraver is under control, but users forget to operate and keep the laser beam working, extra safety will cut off in case the motor stopped moving, to prevent fire.
● LaserGRBL ( free software ) supports Windows XP, 7, 8, 10. LaserGRBL is the most popular carving software in the world, could import different format images, you could editing in PhotoShop, Inkscape, CAD, etc. and then connect to the engraver via laser LaserGRBL for engraving and cutting.
● LightBurn ( paid software, lightburnsoftware.com ) supports Windows, Mac OS, and Linux. It’s the most popular paid carving software in the world, very easy to use.
● This laser engraver supports PWM mode.
● Pre-assembled parts, just need 10 – 20 minutes to install the machine.
● 400 x 430 mm large engraving area.
● Aluminum profile frame + structured cabling, solid structure, smooth operation, attractive appearance
● Synchronizing shaft mechanical structure, avoid out-sync on two Y rails, during full speed engraving.

Specification:
● Motherboard: 32 bits motherboard with STM32 MCU
● Firmware: Ortur Laser Master Firmware
● OS of Upper Computer: Windows ( Working with LaserGRBL ), MAC OS and Linux ( Working with LightBurn )
● Power of Laser Engraver: 36W, 12V 3A
● Electrical Power of Laser Module: 7W, 15W, 20W
● Wave Length: 445 ± 5nm
● Variable Focus: Yes
● Default Focal Length: 55MM for 15W & 20W Laser Module; 58MM for 7W Laser Module
● Input Format: NC, BMP, JPG, PNG, DXF, etc.
● Carving Area: X: 400MM x Y: 430MM
● Carving Speed: 3000MM / Min and less
● Image size: No Limit ( The pixel accuracy could be adjusted freely, and the default is 300 pixels per inch, it’s about 0.81um pixel precision )

Note:
● Please wear goggles when operating the laser engraver. Wear safety goggles to avoid blindness.
● Please do not touch the laser emitter with your hand, or it may burn your hand.
● Please avoid strong impact on the machine.
● The light engraving machine can not be directly applied to any mirror reflecting object, which may cause injury to the operator or burn the laser.
● This product is not recommended for industrial cutting due to its high engraving speed.

ORTUR Laser Master 2 Laser Engraving Cutting MachineORTUR Laser Master 2 Laser Engraving Cutting MachineORTUR Laser Master 2 Laser Engraving Cutting Machine
ORTUR Laser Master 2 Laser Engraving Cutting MachineORTUR Laser Master 2 Laser Engraving Cutting MachineORTUR Laser Master 2 Laser Engraving Cutting MachineORTUR Laser Master 2 Laser Engraving Cutting MachineORTUR Laser Master 2 Laser Engraving Cutting MachineORTUR Laser Master 2 Laser Engraving Cutting MachineORTUR Laser Master 2 Laser Engraving Cutting MachineORTUR Laser Master 2 Laser Engraving Cutting MachineORTUR Laser Master 2 Laser Engraving Cutting MachineORTUR Laser Master 2 Laser Engraving Cutting MachineORTUR Laser Master 2 Laser Engraving Cutting MachineORTUR Laser Master 2 Laser Engraving Cutting MachineORTUR Laser Master 2 Laser Engraving Cutting Machine
Brand Name

Ortur

Model Number

Ortur Laser Master 2

CE Certification

Yes

Consumables Diameter

0MM

Printing Speed

0-3,000MM/Min

Bed Temp

0 ℃

Slice Thickness

0MM

Language

English

Maximum Printing Speed

0-3,000MM/Min

Interface Type

USB

Color Print Speed

0-3,000MM/Min

Fliament

Wood,Acrylic,etc

Slice Software

LaserGRBL, LightBurn

Power Supply

12V / 3A

Maximum Working Speed

0-3,000MM/Min

Precision

0.05-0.4MM

Voltage

110-220V

Operating System

Win10 Mac and Linux

File Format

BMP, JPG, PNG, etc

Nozzle Diameter

0.4MM (Custom Options: 0.5/0.3/0.2MM)

Diameter Temp

0 ℃

Auto Leveling

NO

Maximum Print Size

400*430MM

Molding Technology

FDM

Motherboard

OLM V1.3 Motherboard

Firmware

V1.34 Firmware

Motors

NEMA 17 Stepper Motors

Mechanical Precision

Y:12.5um, X:12.5um

Pixel Accuracy

Adjustable

Default Focal Length

58&55mm

Control Mode

PWM

Power Rate

S0-S1,000

Available Materials of Engraving

Wood, Paperboard, Acrylic

Available Materials of Cutting

Kraft Paper, Paper Board, etc.

Real customer reviews

There are no reviews yet.
Write a review

Shopping cart

×

No products in the cart.